Load Balancing with the Management Appliance

The features described in this section are only available on the Management Appliance.
Optionally, you can use the Configuration > Network > Load Balancing page to configure a Management Appliance as a load balancer. This lets the Management Appliance distribute load between any Web Appliances that are joined to it.
Note
You cannot configure load balancing when using DHCP.

To configure load balancing:

  1. Click the On button to enable load balancing.
  2. In the Load balancing configuration table, select the appliances to which you want to apply load balancing.
  3. In the Virtual IP text box, enter the virtual IP that you want to assign to this Management Appliance.
  4. Click Apply.